[vc_row full_width=”stretch_row” css=”.vc_custom_1553766500880{background-color: #e5550f !important;}”][vc_column][vc_empty_space][apress_heading sub_title=”” enable_delimiter=”” color_scheme=”design_your_own” main_heading_color=”#ffffff” style=”heading_style1″ title_font_options=”tag:h2″ subtitle_font_options=”tag:div” class=”dskjhkjds”]


[/apress_heading][vc_empty_space][vc_row_inner][vc_column_inner width=”1/2″][vc_toggle title=”How can I avoid the “orange peel” effect on my clear coat?”]

Paint the Clear Coat with the first coat a normal thin closed equal coat this way you will have less orange peel which you would have to equal out with the second coat, then you will have added to much product.

[/vc_toggle][vc_toggle title=”What is the best application temperature for Clear?”]

Best product temperature for Clear 17-19 degrees.

[/vc_toggle][vc_toggle title=”Storage of clear in Winter?”]

Don’t leave your Clear Coat in winter on the ground.

[/vc_toggle][vc_toggle title=”How much thinner in clear coat?”]

Don’t add too much Thinner.

[/vc_toggle][vc_toggle title=”Which Hardener shall I use?”]

Always use the suggested by producer Hardener and Thinner.

[/vc_toggle][vc_toggle title=”What tip can you give me when drying with forced air?”]

Always when forced drying the Clear Coat use the complete time and heat which is recommended.

[/vc_toggle][vc_toggle title=”What nozzle do you recommend for s good finish?”]

Recommended nozzle for a good finish 1.2mm with TE110.

[/vc_toggle][vc_toggle title=”Tips for nozzle and spray gun?”]

Change your nozzle, needle and Aircap depending how many cars or pieces you paint a day at least every 6 months.

[/vc_toggle][/vc_column_inner][vc_column_inner width=”1/2″][vc_toggle title=”How to avoid mapping?”]To avoid mapping with filler whilst applying, applicate a thin open coat. It only takes a couple of seconds to dry, then you can applicate a full coat.[/vc_toggle][vc_toggle title=”How to mix putty?”]

Mixing putty, don’t mix your putty to fast you will create holes inside, it will react like cream.

[/vc_toggle][vc_toggle title=”How much hardener do I have to use with polyester putty?”]

11. 2-3% hardener small tip.

[/vc_toggle][vc_toggle title=”What setting do I need to sand filler?”]

Sanding filler with 2.5-3.0 mm orbital, P400-P600 use no water.

[/vc_toggle][vc_toggle title=”What can I use to reach difficult areas when sanding?”]

For corners, edges, and hard to reach areas use our Double Cut green, fast cutting and matting.

[/vc_toggle][vc_toggle title=”Drying in the oven, what shall I pay attention?”]

Have the correct airflow when drying in the oven, Always have clean floor and roof filters for a good and equal circulation in the spraybooth.

[/vc_toggle][vc_toggle title=”Correct use of Silcone remover?”]

For a good clean surface take off the Silicone remover with a Microcloth (Top the best).